Although DIY hardware is becoming more and more abundant, the cool collocation will eventually return to the origin. The same is true for the color matching of the host, but the more connotative DIY is becoming less and less. On the contrary, the more pure and intuitive matching is gradually replaced by the DIY installation of new technology. But doesn't DIY apply the impact of new products to the original principle? So how do you use this 12 generation I7 12700K+RTX3070ti+XPG DDR5 LANCE 6000 32G DDR5 platform with 32G black memory in your hands to toss your favorite classic color contrast host to match a more unique desktop host to pay tribute to the classic red and black color matching? I wonder if you like this gorgeous color matching host on your desktop?
In fact, the hardware selection and color matching of DIY host depend on the selection of chassis to a large extent, and there are really few chassis that can be selected to match a set of pure red and black color matching hosts. After all, the chassis with red appearance is indeed a little less popular. However, most of the chassis on the market are either black or white, or color matching, Macaron color system. Pure red chassis are really rare. This small HYTE Y60 sea view room case is undoubtedly a good choice for red and black color matching. So this time, all the matching hardware of the host is also around this chassis.
HTYE Y60 ATX chassis – This chassis has three colors to choose from: pure black, white black, red black. This time, we started with a more colorful color: red and black. In fact, red and black color matching can also have a lot of matching options, such as red and black color matching of ROG, red and black color matching of Ferrari and other classic color matching elements.
The appearance design is the feature of this "Netred" chassis, which adopts the corner treatment on the side and front, and the glass adopts the design of three side split installation. The overall appearance is really different from the traditional straight face chassis in terms of visual impact, and the overall design is stronger. If you are tired of watching O11, you might as well try this "fish tank" with more visual impact.
In fact, the gap in the middle of the three side glass with split design is still large. If the glass case with large gap is used with large environmental dust, the cost of this design is more practical than that of the curved glass with integrated molding. In terms of explosion-proof performance, this split design should be better than the integrally formed glass, but the overall radian is not as good as the integrally formed glass.
The I/O panel of the chassis is located at the bottom of the corner of the chassis. The advantage of ATX chassis with such a design is that it does not have to stand up and press the key. The disadvantage is that it is easy to touch a foreign object, such as a cat in your home.
Then look at the design of the right side. The panel design with stronger texture is used to deal with it. In addition, the bright red color matching is used on the front. It really has a very eye-catching performance in visual sense. Compared with the traditional panel design, this novel stripe design is indeed worth referring to.
The glass surface adopts screw+bead snap fastener. The large glass on the left and right sides and the front right adopts this fixing method, while the small glass in the middle adopts upper and lower fixing. The size of the chassis: 456MM long * 285MM wide * 462MM high, which is compatible with the installation of E-ATX motherboard at the maximum, and the heat dissipation limit is 160MM high. However, the design of the air duct of this chassis is basically not friendly to traditional air cooling. After disassembly, it can be seen that the structure inside the box is almost the same as that of the O11, so we won't waste time to describe it here.
The lower cooling cabin is designed with a striped ventilation barrier similar to the right side panel. From the top view, it can be seen that the space reserved for the lower part is very sufficient. In addition to the vertical installation and fixation of the video card, it is OK to place the water tank and water pump if the split water cooling is used. There are also many separate schemes for this chassis on the Internet, and the official renderings also use the separate water cooling scheme.
The standard PCI-E4.0 x16 extension cable is different from the vertical mounting bracket generally used. The vertical mounting mode of this chassis has its own characteristics. The adjustment is made according to the position of the video card slot on the motherboard, while the lower fixing has its own fixing area, because it is not too difficult to fix it with multiple screws. The video card can support the installation of a video card with a maximum length of 375MM and a width of 75MM, so some large integrated water-cooled video cards can also have good installation compatibility.
The depth at the corner can reach 20cm. The width and depth of the corners can also reach 15cm. This is very convenient for the placement of split water-cooled hardware. If it is installed regularly, such a large width and depth will make the interior of the chassis very empty. You need to be careful to place something as a decoration supplement.
Then look at the hardware materials of the chassis. The frame of the whole box is nearly 1MM thick. The whole box weighs 9.6KG. The back cabin design also has its own characteristics. In addition to some inlet ports, it is basically similar to the O11. The heat dissipation layout is that the upper part supports 360MM water-cooled installation, the middle left side supports 240/280MM water-cooled installation, and the deep back of the side heat dissipation installation position does not support sandwich installation.
In terms of details, the incoming line rubber pad of Y60 is very special, and its toughness and thickness are more solid than some high-end domestic chassis. The painting process of the hardware is also good. Although the paint surface is frosted, the hand marks left by sweat are relatively shallow, unlike some domestic cases. The anchor lines for binding lines are planned in a very neat and meticulous way. The inlet Y60 of some concealed wires is good in design, which is also worth learning from friends. It plays a very good role in the overall wire concealment. The standard fan of Y60 is a little simple. After all, the chassis with a price of 199 US dollars (nearly 1400 yuan) is a little small with only three 3Pin fans. The lower fan supports 120MM/140MM * 2 fan installation as the lower air inlet, but the lower foot pad height is too low, which will affect the lower heat dissipation performance more or less. Some internal wiring outlets are also very practical, which can only be experienced during the actual installation. It is not necessary to dictate. After all, everyone has their own idea of wiring.
The motherboard is designed with pixel lattice LED mirror screen, luxurious 20+1 phase power supply, and the maximum output can reach 90A DrMOS. It supports XMP 3.0, up to dual channel DDR5-6400, and the maximum memory capacity is 128GB. There is also a front USB 3.2 Gen 2 * 2 Type-C interface next to the memory slot, which supports the ROG MAXIMUS Z690 HERO motherboard of the player's country with the characteristics of QD4+fast charging.
In terms of memory, considering the coordination and aesthetics of the overall installation, the DDR5 6000 frequency combination with 64G capacity is directly used. However, in addition to the idea of matching beauty, the frequency of this generation of people who are full of 4 pieces is almost impossible. If you want to overclock, it is recommended to use two. XPGLANCER series memory, the pure blackened 1.95MM thick vest can be used to set the atmosphere light area of the light effect mode in different scenes according to the light effect software of the motherboard. Synchronous regulation is also the most popular playing method of the light bar memory at present, and the effect can be displayed only after the machine is lit.
The power supply also continues to use the 1300W white gold medal full module power supply of the XPG Core Reactor series, which is a large wattage power supply left over from this installation. The power supply adopts the platinum power supply scheme of Qiaowei Electronics. It has the same design appearance as the XPG Magic Core series power supply. The size of the full module ATX power supply is more compact (160mm long × 150mm wide × 86mm high). Compared with the size of other white gold medal power supplies of the same type, Core Reactor 1300W optimizes the PCB scheme to control the overall size of the power supply within a very small volume model, which is more convenient for the installation of different types of ATX chassis. The Japanese 105 ° C capacitor, active PFC design and full bridge LLC+DC to DC solution are adopted. In terms of mute and heat dissipation optimization, Magic Core 1300W platinum power supply adopts the built-in fan of gentle typhoon GT2150, double ball bearing+exclusive patent technology, and supports fan start and stop technology (the load is less than 30%, the fan stops rotating, and the above is intelligent speed regulation according to different loads).